TITEBOND ALL SIDING SEALANT


Titebond® All Siding Sealant is a non-reactive, exterior use, elastomeric acrylic formula that combines the superior flexibility and durability of a silicone with the ease of use and water cleanup of an acrylic. It provides a smooth, mildew-resistant bead, paints easily in one coat and is an effective barrier to air, dirt, insects a...

more

Features & Benefits

check_circle
IDEAL FOR: Sealing doors, windows, soffits and awnings around vinyl, aluminum, stucco, wood, brick and glass.
check_circle
SEALS: Vinyl, aluminum, stucco, wood, brick, cement, glass and most common building materials.
check_circle
Excellent adhesion to siding materials
check_circle
Exterior - High performance
check_circle
Superior flexibility & durability
check_circle
Easily paintable - Water cleanup
check_circle
Effective barrier to air, dirt, insects and radon

Application Guidelines

Application Temperature:
Above 40°F (4°C)
Service Temperature Range:
-35°F to 180°F
Method of Application:
Cartridge/caulking gun
Working Time:
Approximately 10-15 minutes for a 1/4" bead
Application Directions:
1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2" in width. 2. Cut tip at 45° angle for 1/8" to 1/2" bead and place in cartridge gun. 3. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
Painting:
The sealant should be dry to the touch and ready to paint in 2-4 hours.
Cleanup:
Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Limitations:
Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2-4 hours. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Physical Properties

Type
Acrylic
Calculated VOC
<50 g/L (<1.5%)
Color
White and colors
Solids
82%
Flashpoint
Solvent free/Not applicable
Viscosity
450,000 cps
Freeze / Thaw Stability
Stable
Storage Life
24 months in a dry location at or below 75°F

SPECIFICATIONS

Exceeds:
  • ASTM C920 Grade NS Class 25
  • ASTM C834 Type OP Grade -18°C
  • Federal Specification TTS-00230C Type S Class A

Warranty Statement

45 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.