Designed for bonding foamboard insulation and polystyrene to most porous building materials. It is also ideal for use on paneling, plastics, tub surrounds, wood, fiberglass, drywall, ceramic tile, metal and more. It exceeds the performance requirements of the AFG-01 and ASTM C557specifications.

Features & Benefits

  • Extremely versatile - bonds most common building materials
  • Permanently flexible



Application Guidelines

  • Coverage: 28 oz. cartridge the maximum length of bead according to bead diameter is 343 ft. for 1/8" bead, 86 ft. for a 1/4" bead and 38 ft. for a 3/8" bead.
  • Application Temperature: 0°F to 100°F
  • Service Temperature Range: -20°F to 120°F
  • Method of Application: Cartridge/caulking gun
  • Working Surfaces: Surfaces to be bonded should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply mastic to panel perimeters and on 16-inch centers or a criss-cross pattern to ensure maximum adhesion. Temporary bracing or nailing may be needed to improve contact until adhesive dries. Allow to cure overnight for maximum strength.
  • Working Time: Approximately 10-20 minutes for a 1/4" bead
  • Cleanup: Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    28 oz. Cartridge 343 ft. 86 ft. 38 ft. 21 ft.

Physical Properties

  • Type: Synthetic elastomeric polymer
  • Calculated VOC: 310 g/L
  • State: Medium-viscosity mastic
  • Weight Per Gallon: 10.0 lbs.
  • Color: Tan
  • Flashpoint: < 0°F
  • Solids: 74%
  • Freeze/thaw Stability: Will not freeze
  • Viscosity: 130,000 cps
  • Storage Life: 18 months in tightly closed containers at 75°F


Titebond Panel & Foamboard is not designed for continuous submersion. Do not apply to polystyrene foam if temperature is 90°F. or greater. Do not apply over wallpaper. Do not adhere one non-porous material to another since this will slow or prevent drying and damage plastic or foam surfaces.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
34620370830346221003708303462928 Oz. Cartridge29.311244

Caution Statement

DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains hexane and isopropyl alcohol. Do not use near heat, sparks & flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin or respiratory system effects. First Aid: If dizziness or other adverse health effects are experienced, move to fresh air; contact physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

WARNING: This product contains small amounts of toluene, a chemical known to the state of California to cause birth defects or other reproductive harm.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International